D - What do I have to do to install Livetouch?
R- Absolutely nothing. You just have to connect Livetouch to the USB connector of your personal computer and Livetouch will be recognized by your pc as a normal keyboard.
Every time a sensor will recognize a touch, it will send the computer an input as if I pressed a type of the keyboard.
The correspondence chart of the keys is the following:
| Sensor |
Key |
| 1 |
1 |
| 2 |
2 |
| 3 |
3 |
| 4 |
4 |
| 5 |
5 |
| 6 |
6 |
| 7 |
7 |
| 8 |
8 |
| 9 |
9 |
| 10 |
0 |
| 11 |
ENTER |
| 12 |
Backspace / Delete |
| 13 |
Right arrow |
| 14 |
Left arrow |
| 15 |
Down arrow |
| 16 |
Up arrow |
D - How can I set the sensitivity of Livetouch to make it work on different materials?
R- Itís very simple. You just have to place all the sensors on the surface that you want and connect Livetouch to the USB connector of your pc.
Livetouch is smart and effect an auto-calibration to work properly on every material and thickness.
To do that, you can also observe the status leds, there is a blue and a green one.
When the blue led is on, that means your Livetouch is correctly powered by the USB connector.
The green led changes instead depending on the moment that we observe it.
When actioning Livetouch the green led blinks with a constant frequency.
This blinking states that Livetouch is analyzing the material and its electric fields to perfectly calibrate each single sensor.
At the end of the blinking, the green led stays on for a second, without blinking.
This means that Livetouch has ended its calibration and is now ready for use.
The calibration phase lasts 15 seconds more or less.
In its normal use, at the end of the calibration, the green led blinks every time it recognizes the touch of a sensor.
D - Does Livetouch have to be connected to an external power source or does it work also with battery?
R- Livetouch works with the power available from the USB socket. It doesnít need any other power source.
D - What is the maximum thickness Livetouch can pass through?
R - Livetouch can pass through very thick materials. Thickness changes according to the material and the dimensions of the sensor used.
With the sensors included in the functioning kit it can pass through more than 20mm of glass.
Under testing Livetouch has passed without any problem also anti-bazooka glasses. See the video here below:
|
